1. The maximum speed of the main shaft of the stranding machine is
3000rpm.
2. Automatic tension control: When stranding, the wire tension needs to be
continuously increased when the wire is received from the bottom of the reel to
the full reel. This machine can automatically track and adjust the wire tension;
make the wire tension of the whole reel uniform and consistent, and the machine
can also adjust the tension without stopping.
3. The main machine is oil lubricated and naturally circulated for cooling,
which effectively extends the service life of the main shaft bearing. The wire
passing system adopts a new structure, and the wire passes directly from the
main shaft guide wheel to the bow belt, eliminating the scratches and strand
jumping caused by the failure of the corner guide wheel on the aluminum
disk.
4. Three pressing devices are installed in the machine to ensure the
roundness of the conductor after twisting and reduce the loss of insulating
materials.
5. The whole machine adopts synchronous belt transmission, there is no
lubrication point in the machine, keep the machine clean, and the stranded wire
is free of oil and dirt, which is suitable for the conductor twisting of various
types of wires with high surface cleanliness requirements.
6. To adjust the pitch, you only need to replace a take-up wheel, and to
adjust the twist direction, you only need to pull the reversing lever. It is a
simple operation, which reduces the error rate and work intensity of the
operator.
www.jinhanmachinery.com
Jinghan Machinery (Dongguan) Co., Ltd.
