Addressing Process Cooling Demands in Rubber and Related Manufacturing
Industrial processing operations, including rubber and other heat-generating manufacturing lines, depend on consistent process cooling to maintain product quality, protect machinery, and keep production cycles efficient. When processing equipment runs continuously, waste heat accumulates and must be removed through a dependable chilled water supply. Jiangsu Obuy New Energy Development Co., Ltd., operating under the Obuy and Obuytech brand names, supplies a broad range of industrial chillers engineered for general industrial process cooling, offering chilled water delivery from 5–35°C with temperature control accuracy of ±1°C — performance characteristics that support the stable thermal conditions required across general industrial manufacturing environments.
Air-Cooled Chillers for Space-Constrained and Rapid-Deployment Sites
For manufacturing facilities where water resources are limited or installation space is constrained, Obuy's air-cooled chillers remove the need for cooling towers, cooling water pumps, and complex piping. This plug-and-play design supports rapid deployment and retrofit projects, allowing a unit to be brought online simply by connecting it to a power supply and chilled water pipes.
Within this product line, the "Industrial Air Cooled / Full Closed Scroll Type /Piston Type Compressor Chiller" is positioned for general industrial cooling, offering a choice between fully closed scroll and piston type compressors so that compressor characteristics can be matched to specific cooling duty requirements. The "10HP 20HP 30HP 40HP 50HP Industrial Water Chiller Glycol Chiller Machine Air Cooled Scroll Type Chiller Cooling System Chiller Unit" spans five capacity options, allowing facilities to select load-matched equipment and avoid unnecessary capital and operating costs. A glycol-compatible cooling circuit on this unit also supports process cooling applications where water alone is unsuitable.
For larger-capacity operations, the "75 HP Air-Cooled Industrial Water Chiller for Process Cooling" delivers stable 5–35°C chilled water using a vapor-compression cycle with air as the cooling medium. It is built with hydrophilic aluminum fin coils that resist dust accumulation and frost formation, an eco-friendly refrigerant compliant with industry standards, and intelligent temperature control with fault self-diagnosis for remote monitoring. Its operating range extends from -15°C to 45°C, and it is offered in an integral monoblock configuration for smaller units or a split configuration for high-power installations. Facilities needing a fully self-contained setup can also consider the "3 HP Box Type Air-cooled Industrial Chiller, Built-in Water Tank & Pump for Mold Cooling," which integrates a water tank and pump into a compact box-type unit, reducing the need for separate external components on the production floor.
Water-Cooled Chillers for High and Stable Energy Efficiency
Where continuous, energy-efficient cooling is the priority, water-cooled units deliver higher and more stable energy efficiency, with COP typically reaching 4.5–6.0 and summer efficiency degradation typically under 5%. Obuy's water-cooled scroll chiller range includes the "High Efficiency Industrial Water Chiller for Continuous Process Cooling, Customizable Anti-Corrosion Type Available 150 HP water-cooled scroll chiller," which offers a customizable anti-corrosion configuration for operation under demanding water quality conditions, alongside a high-performance water-cooled heat exchanger built to resist scaling and corrosion.
The "75 HP Water-Cooled Scroll Chiller, Industrial Water Cooled Chilling Unit for Process Cooling & Constant Temperature Control for Chemical, Pharmaceutical & New Energy Industry" and the "30HP Water-Cooled Chiller with Plate Heat Exchanger" extend this water-cooled lineup, each delivering a COP of 4.0–5.0, stable chilled water at 5–20°C, and temperature control accuracy of ±1°C, alongside low noise, minimal vibration, and zero pollutant emissions. These units operate across a wide temperature range of -10°C to 45°C, giving facilities flexible load regulation for continuous, close-tolerance process cooling.
Heat Pump Chillers for Combined Cooling and Heating
Some manufacturing processes benefit from both chilled water and hot water from a single system. Obuy's heat pump chillers provide dual cooling and heating from one unit, saving over 60% energy versus an electric chiller plus boiler scheme, with no combustion and zero carbon emission. The "25HP Air-cooled Heat Pump Chiller / Reverse Cycle Chiller" uses scroll compressor technology with EVI vapor injection to enable stable operation from -30°C to 45°C, supplying 5–12°C chilled water and 40–55°C hot water at ±1°C accuracy, with one-touch cooling and heating mode switching and industrial waste heat recovery capability.
The "10 HP Industrial Hot and Cold Water Heat Pump, Air-cooled Heat Pump Chiller for Process Cooling & Heating, Coaxial Heat Exchanger" is a skid-mounted unit that integrates the heat pump, pumps, and controls on a single transportable skid. This pre-piped, ready-to-connect design shortens installation time and reduces civil works, making it suitable for remote or temporary industrial projects that require flexible and rapid deployment.
Evaporative Cooling for Large Industrial Workshops
For facilities seeking compressor-free ventilation cooling across large production areas, the "5HP Evaporative Cooling Industrial Air Conditioner, Energy Saving Evaporative Cooled Air Conditioning Unit for Workshop Constant Temperature Cooling" uses water evaporation rather than a compressor, cutting energy consumption by over 60% versus conventional air conditioning. It offers direct evaporative cooling for arid regions or indirect evaporative cooling to limit added humidity, high-efficiency wet pad evaporative media, and an operating range from -5°C to 45°C, achieving a temperature reduction of 5–15°C while maintaining a 25–28°C comfort range and 5–8 air changes per hour.
Technical Capabilities and Quality Assurance
Across its product lines, Obuy applies a vapor-compression refrigeration cycle with scroll, screw, centrifugal, or piston compressor options, anti-scaling and anti-corrosion water-cooled heat exchangers for varied water quality conditions, and intelligent temperature control with fault self-diagnosis and remote monitoring. Delivery models include fully integrated plug-and-play units, skid-mounted systems with pre-piped interfaces, and split configurations for high-power installations, while low-maintenance air-cooled designs require only condenser fin dust cleaning and no water treatment system.
Jiangsu Obuy New Energy Development Co., Ltd. has obtained ISO9001, ISO14001, and ISO45001 management system certifications, as well as CCC, CE, and other certifications, and provides energy-saving smart manufacturing and integrated intelligent control solutions based on multi-energy combinations for countries around the world. The company has delivered over 1,000 energy-saving solutions and project cases, some in cooperation with Fortune Global 500 companies, foreign-invested enterprises, central SOEs, and other SOEs. Backed by 20 years of engineering experience, Jiangsu Obuy New Energy Development Co., Ltd. provides technical guidance, installation, construction, commissioning, and after-sales services, supporting customers in achieving low carbon, energy saving, consumption reduction, and emission reduction goals.
Matching the Right Chiller to Process Cooling Needs
Selecting the right industrial chiller depends on site conditions such as available water resources, installation space, required temperature range, and whether combined cooling and heating is needed. Obuy's portfolio — spanning air-cooled, water-cooled, heat pump, and evaporative cooling units — is built around flexible installation options, including monoblock, split, skid-mounted, and box-type configurations with built-in water tanks and pumps, alongside reduced operating and maintenance costs through high-efficiency heat exchange and intelligent control. For general industrial process cooling applications where consistent chilled water supply, temperature stability, and installation flexibility are priorities, Jiangsu Obuy New Energy Development Co., Ltd. offers a documented range of equipment designed to meet these operating requirements.
https://www.obuytech.com/
Jiangsu Obuy New Energy Development Co., Ltd.
